Produk atau jasa ini sudah tidak dijual, silakan hubungi perusahaan bersangkutan
untuk keterangan lebih lanjut.
- Durag D-R 808 Dust monitor
Durag D-R 808 Dust Monitor
Update Terakhir
:
26 / 04 / 2021
PT. Surrama Tridaya Mandiri adalah perusahaan yang bergerak dalam bidang usaha importir , distributor alat-alat instrument : flowmeter, gas detector, control valve, safety valve, pressure reducing valve, dll
Detail Durag D-R 808 Dust Monitor
Durag D-R 808 Dust monitor
Suitability tested scattered light dust monitor for monitoring small to medium dust concentrations in dry flue or process gases.
With its certification range of 0 ... 7.5 mg/m3 the D-R 808 is ideally suited for monitoring very low dust concentrations.
Overview
- Single-sided installation without optical alignment
- Automatic zero and reference point check
- Automatic contamination check and correction
- Integrated purge air monitoring
- QAL1 certified according to EN 15267-3
- Compliant with US EPA 40 CFR 60 PS11
- Lowest certification range 0 ... 7.5 mg/m3
Benefits
- Certified for official emission monitoring
Type approved according to EN 15267-3, compliant with the requirements of US EPA 40 CFR 60 PS11 - Lowest certified range 0 ... 7.5 mg/m3
Reliable measurement of very low dust concentrations - Space-saving and easy installation
One-sided Installation without alignment - Durable through integrated purge air monitoring
Protection of the device through continuously monitored purge air supply - Low maintenance effort
Linearity check with reference filters without removing the device from the stack
(if stack pressure is negative) - Reliable emission monitoring
Automatic control functions ensure reliable measuring values
Technical Data
| Measuring principle | Forward scattering |
| Conformities | CE
IED 2010/75/EU
US-EPA 40 CFR 60 PS-11 |
| Certificates | CE, QAL1 EN 14181:2015 / EN 15267-1:2009 / EN 15267-2:2009 / EN 15267-3:2008, MCERTS pending |
| Measuring location | In situ, probe in contact with flue gas, one-sided installation at the stack, no optical alignment |
| Measuring sequence | Continuous |
| System components | D-R 808 M measuring device
D-TB 200 terminal box incl. purge air supply
D-ISC 100 universal operating unit (option) |
| Self-check, protective functions | Automatic zero and reference point check
Automatic contamination check and correction
Integrated purge air monitoring (option)
Connector for external purge air sensor or customer protective function supplied by the customer |
Tampilkan Lebih Banyak
