RMG 210 Gas pressure regulator
RMG 210 primarily used for automotive and research applications; often appropriate for short flow rate control lines inside large volume gas pressure control stations The device is ideal for natural gas and all non-corrosive gaseous materials. RMG 210 has only small set-point differences owing to inlet stress variations. It is easy to operate and maintain. The RMG 210 can be connected by an electrical remote control of the outlet pressure. Information may be generated with an internal or external calculating impulse link. Regulator Gas
A two-stage regulator is designed to keep the exit stress of the gas medium steady in the key and free from interfering factors such as inlet tension or shifts in the flow rate. According to the intermediate stress system included in this spring-loaded regulator, the detrimental effect of the inlet pressure changes on the control precision is minimized to a marginal minimum and is essentially removed. A two-stage regulator is designed to keep the exit pressure of the gas medium steady in the key and free from interfering factors such as inlet stress or shifts in the flow rate.
According to the intermediate stress system included in this spring-loaded regulator, the adverse effect of the inlet pressure changes on the control precision is minimized to a marginal minimum and is essentially removed. A two-stage regulator is designed to keep the exit stress of the gas medium steady in the key and free from interfering factors such as inlet tension or shifts in the flow rate. Thanks to the intermediate stress system included in this spring-loaded regulator, the detrimental effect of the inlet pressure changes on the control precision is limited to a marginal minimum and is essentially removed.
